Massive Selection for Plastic pens, Promotional pens P1046 to Cambodia Factory

Short Description:

Item Name: cheap plastic pens Type: plastic ballpoint pen MOQ: 10000pcs Action: click Product description: Customized Logo Pens Promotional plastic ballpoint pen, gift pens, Solid Colored Barrel, Solid White Barrel 1.Material : Plastic 2.Color:black,red,blue,green,orange,purple. Any Pantone color or multi-colors can be customized. 3.Size:SIZE: 14.5cm 4.MOQ:10000pcs 5.Samples Time: (1)6 days-If you want to customize your logo. (2)3 day-For our existing samples for reference. 6.Packing Details:...


Product Detail

Product Tags

Related Video

Feedback (2)

We believe that long term partnership is a result of high quality, value added service, rich experience and personal contact for Notebooks , Electronics gifts , Promotional pens , If you are interested in any of our items, please don't hesitate to contact us and take the first step to build up a successful business relationship.
Massive Selection for Plastic pens, Promotional pens P1046 to Cambodia Factory Detail:

Item Name: cheap plastic pens

Type: plastic ballpoint pen

MOQ: 10000pcs

Action: click

Product description: Customized Logo Pens Promotional plastic ballpoint pen, gift pens, Solid Colored Barrel, Solid White Barrel

1.Material : Plastic

2.Color:black,red,blue,green,orange,purple. Any Pantone color or multi-colors can be customized.

3.Size:SIZE: 14.5cm

4.MOQ:10000pcs

5.Samples Time:

(1)6 days-If you want to customize your logo.

(2)3 day-For our existing samples for reference.

6.Packing Details:

1pc/Oppbag 50pcs/Inner box 1000pcs/Carton Ctn size:43*32*28cm GW:17KGS

7.Production Capacity:1000,000pcs Per month.

8.Payment Term: T/T,PAYPAL,WESTERN UNION,MONEY GRAM


Product detail pictures:

Massive Selection for
 Plastic pens, Promotional pens P1046 to Cambodia Factory detail pictures


We have advanced equipment. Our products are exported to the USA, the UK and so on, enjoying a good reputation among customers for Massive Selection for Plastic pens, Promotional pens P1046 to Cambodia Factory, The product will supply to all over the world, such as: Venezuela , Tanzania , Kuwait , With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in this industries and other industries.


  • See how I customize my Nerf Strongarm blaster with paint weathering and a simple LED strip. as a baby step towards prop making.
    Subscribe to my channel: http://bit.ly/1k8msFr

    DETAILS: http://www.iliketomakestuff.com/customize-nerf-blaster

    Special thanks to William Morales for his support on Patreon! He made this video possible!!

    MORE PROJECTS, POSTS AND EVENTS

    http://www.iliketomakestuff.com

    HERE’S WHAT YOU’LL NEED:
    http://amzn.to/1Envvvc – Nerf N-Strike Elite: Strongarm Blaster
    http://amzn.to/1EnvzLx – Apoxie Sculpt
    http://amzn.to/1Jr0Zjf – LED strip
    http://amzn.to/1Enwqf2 – 2xAA power inverter
    http://amzn.to/1hPae3X – Dremel tool
    http://amzn.to/1PXBTL0 – Metallic silver spray paint
    http://amzn.to/1Jr0buB – Metallic dark gray spray paint
    http://amzn.to/1Jr0vJK – Gray primer spray paint
    http://amzn.to/1PXBZSY – Acrylic model paint set
    http://amzn.to/1P9bHN6 – Soldering iron
    http://amzn.to/1IoZAZL – Multimeter
    http://amzn.to/1hm39qY – Wire strippers (not the ones I have, but good ones)
    http://amzn.to/1eVTjKG – Thin solder
    http://amzn.to/1IoZ2TG – Solder tip cleaner
    http://amzn.to/1DxuSyA – Tekton Precision Screw driver kit
    http://amzn.to/1DtOnsn – Fiskars cutting mat

    BUY A SHIRT, STICKER, PENCILS and MORE!!

    http://www.iliketomakestuff.com/store

    FOLLOW:

    http://facebook.com/iltms

    http://twitter.com/iliketomakestuf

    http://instagram.com/iliketomakestuff

    To be fair, I started with the same blaster that my kids each have :)
    The gun comes apart very easily, with a precision screw driver.
    There are lots of small springs and screws inside. Be sure to take photos of everything before disassembling.
    I used a Dremel tool to sand off all of the names, logos and warnings.
    Then I smoothed out the surfaces (kind of) with a sanding block.
    I laid all of the parts out to paint.
    I used a gray primer made for plastics, for the first layer.
    Then I put down two coats of metallic silver spray paint. Some pieces were black instead.
    After the paint was all dry, I started the first layer of detailing.
    As a first pass, I pushed acrylic flat black paint down into the recesses of the surface, and wiped away the excess.
    I added minimal color to a few parts for highlighting and detail.
    I stole the inverter from some EL wire that I had.
    I chopped off the end, and stripped the wires.
    After disassembling it, I unsoldered the wires, and re-soldered them so that they came out the back side of the inverter.
    I drilled a small hole to allow the wires to pass through the case.
    I cut a single section from a long LED strip.
    This strip was soldered directly to the power inverter.
    Now I had a very small strip of lighting to use in the barrel.
    I drilled a hole in the bottom of the gun for feeding in the wire.
    I used a Dremel to cut out a channel, from that hole, to house the wires.
    A little hard to be trimmed from the barrel to allow the wires to come through.
    I stuck the LED strip in the barrel using it’s adhesive back.
    Now the barrel had a light!
    I fit the barrel back in place, making sure the wire/LED stayed in place.
    Using a small tool, I pushed the wires into the channel I’d made so they wouldn’t get in the way of reassembly.
    Then I put everything back in place and closed the gun.
    Before moving on, I tested the lights.
    To mount the inverter and sculpt the gun, I used Apoxie Sculpt.
    It’s a two part, 1-to-1 mixture. Be sure to mix it thoroughly, per the instructions.
    I used s small amount to mount the inverter to the gun body.
    Then I added small amounts to merge the surfaces and slightly customize the shape. You could go crazy here and make the gun totally different.
    I added a big block to the handle to make it fit an adult hand better.
    Using a little water made it very easy to modify the shape and smooth out the surface.
    It takes 24 hours for the Apoxie Sculpt to fully cure.
    Make sure you’re safe when sanding the Apoxie Sculpt, the dust is VERY fine.
    I feathered the edges of the material with some flexible sand paper.
    Large flat areas were sanded with a sanding block and orbital sander.
    I even re-sculpted a little with the Dremel tool.
    I used compressed air and a tack cloth to remove all of the dust.
    After masking off most of the gun, I primed the new sections.
    They also received the same paint as before.
    I should have masked along body lines where possible to minimize touch up. A little sanding and paint blended it well.
    Then I began dry brushing all of the edges.
    Dry brushing creates the illusion of worn off paint, giving it a “used” look on high spots and edges.
    I used a light silver on the high spots and flat black in the low spots.
    I also brushed on LOTS of black/grey paint, then smeared and wiped it off with paper towels.  This fills small gaps and gives it a dirty/greasy look.
    The more layers and variation, the most aged and distressed the item will look.
    Here it is all finished! It turned out great for a first try (I thought). Second channel: bit.ly/iltms-2



    Promotional Printed San Nicola twist action ballpen – Unusual fashion design – The quoted price includes – Printed 1 colour on the barrel – Ink colour – Blue – Dimensions – 141mm long – Print area – 50 x 7mm – To purchase or for more info please visit: http://www.sussexpromotions.co.uk/promotional-pens/printed-ballpoint-pens/e030-san-nicola-ballpen

    Products and services are very good, our leader is very satisfied with this procurement, it is better than we expected,


    5 Stars By Catherine 2016-7-13 16:09
    The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.

    5 Stars By Barbara 2016-10-17 12:04

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Tree

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Heart

    WhatsApp Online Chat !